Gudel will demonstrate a grinding application at Automate 2026. Source: Titan Robotics
Grinding and surface finishing of fabricated parts is one of the classic dull, dirty, or dangerous applications that are suitable for robot automation. Unfortunately, this requires multiple robots and complex part repositioning, which adds significant cost and extends cycle times while introducing new sources of variation in the process, noted Güdel AG. At Automate 2026, the company plans to show a system designed to scale beyond these physical constraints.
“Expanding the robot’s workspace isn’t just a helpful addition; it’s the factor that finally makes automation feasible for large, difficult-to-reach parts,” said Brenda Courim, director of sales and marketing at Güdel US.
Güdel Inc. is the U.S. subsidiary of Güdel Group, a Langenthal, Switzerland-based manufacturer of automation products, systems, and services. The company supplies linear motion modules, robot track motion units, gantry robots, and components to the automotive, aerospace, logistics, heavy industrial, press automation, and power generation industries.
Güdel US is headquartered in a 45,000 sq. ft. (4,180.6 sq. m) facility in Ann Arbor, Mich., and provides North American customers with engineering, design, production, and customer service support.
Güdel promises stability, reach, and reduced investment
Unlike standard stationary setups, Güdel said its multi-axis motion systems provide three key strategic advantages for the shop floor:
- Reduced capital investment: A single robot can service an entire large work envelope, eliminating the need for multiple fixed units and simplifying cell design, safety, and controls.
- Enhanced process stability: By keeping the robot in a favorable working posture, the system minimizes joint extremes and wear, ensuring repeatability during long, high-force grinding cycles.
- Maximum uptime in harsh zones: Designed specifically for abrasive environments, the track systems protect critical components and position the robot away from aggressive debris zones typical of grinding operations.
“Expanding the robot’s workspace isn’t just a helpful addition; it’s the factor that finally makes automation feasible for large, difficult-to-reach parts,” said Brenda Courim, director of sales and marketing at Güdel US. “The combination of vertical lift and long horizontal travel provides a practical production solution that can be updated through software as part designs evolve, rather than requiring expensive mechanical rework.”
Submit your session idea for the 2026 RoboBusinessAutomate demo to feature massive scale grinding
At Booth 1806 in Chicago’s McCormick Place, Güdel’s will demonstrate how it is overcoming the limitations of traditional fixed-robot cells by adding two additional degrees of freedom to heavy-duty grinding applications. By integrating its TrackMotion Vertical TMV and TrackMotion Floor TMF systems, Güdel allows a single robot to maintain consistent contact pressure and path speed across massive surfaces that would otherwise require multiple robots or complex part repositioning.
The primary show demo features a FANUC R-1000 robot equipped with a grinding end-of-arm tool. The robot is mounted on a TMV system, which is itself integrated into a TMF track. This specific application was developed by systems integrator Titan Robotics to solve the challenges of grinding large weldments for a major off-road equipment manufacturer.
“Applications like this show how manufacturers can overcome the challenges of traditional robotic grinding,” said Lou Finazzo, vice president of sales at FANUC America. “By combining FANUC’s robot performance with Güdel’s vertical and floor-mounted motion, customers gain the reach, stability, and process consistency needed to automate large, demanding grinding applications.”
Gudel will demonstrate a finishing workcell with Titan Robotics and FANUC. Source: Titan Robotics
The post Güdel to show grinding beyond stationary robots with vertical, horizontal motion at Automate 2026 appeared first on The Robot Report.
